Aluminium window bracket set for fixing sheet steel racks PH22-3 or PH30-3 to air vent or ventilation flap. Supplied with stainless steel bolt and self-locking nut.

Zinc-plated steel coupling unit used to connect the rack plate (PH40-3) for the RSD250 rack drive with push-pull tube ø27 mm or ø32 mm. Couplings are fixed to the rack plate and push-pull tube with bolts.

Zinc-plated steel screen bracket set used to secure the sheet steel racks PH30-3/PH40-3 to the push-pull tube in screen systems. The screen bracket set consists of coupling plates and assembly components for fitting onto sheet steel racks. The rack plate is fitted underneath the push-pull tube. The screen bracket set should be used in combination with the TU11-30 (sheet steel racks PH30-3) or TU21-40 (sheet steel racks PH40-3) pinion housing units.

Zinc-plated clamp mounting set for the RSD250-40LR rack drive (500290) for fitting the housing unit to the lattice using clamps. The clamp mounting set consists of a clamping plate, U-bolts and self-locking nut and is available for lattice widths (B) of 50mm and 60mm.

Clamp mounting set ERSD rack drive

Zinc-plated nut plate for fixing the RSD250-40 rack drives (500280) to the duct- or C-profiles. The nut plate should be above the truss (duct section) or mounted in the C-profile.

Synthetic sliding block for use in the RSD250 rack drive when the rack drive has to be mounted non-horizontally. The sliding block can be mounted in the slotted holes in the side plate of the RSD250 rack drive to take up the weight of the rack plate.