Zinc-plated counterplate for mounting TRN520-3S, TRN1000-3S and TRN1000-5S rack drives. The counterplate is fitted below the truss, to prevent deformation of the truss. Use 2 counterplates per rack drive.

Galvanized tube-rack coupling plates for connecting the racks of theEP RackDrive700 and TRN rack drives to ø27 mm or ø32 mm diameter tube, using bolt/nut fastening. The rack heart is aligned with the tube centre line.

Galvanized tube-rack adapter plates for connecting the racks of theEP RackDrive and TRN rack drives with 23.5mm axle stub to ø32 mm diameter tube, using bolt/nut fastening. The rack heart is aligned with the tube centre line.

Zinc-plated link plate (B) and offset piece (A) for connecting TRN1000-3K and TRN1000-5K rack drives (rack 30 mm x 20 mm) to ø27 x 1.5 mm tube, in truss-rail ventilation system with C-lattice. Link plate fastened to tube with flange bolt/nut M6 x 27 (1x). Link plate fastened to offset piece, and offset piece to rack, using bolts/nuts M6 x 35 (4x).

Zinc-plated link shaft for TRN520-3K-1", TRN1000-3K-1" and TRN520-3KC-1" rack drives (50 mm and 60 mm posts) for extending drive to 5/4" tubular drive shaft of outflow ventilation system. Link shaft secured in house unit of rack drive using synthetic retaining clips. Tubular drive shaft attached to link shaft with weld/sleeve coupling.

Synthetic retaining clip to secure the link shaft in TRN523K-1", TRN1000K-1" and TRN523KC-1" rack drives.

Moveable rail console for application in truss-rail systems with insufficient travel space. Rail console can move 124 mm on the guiding profile (s). Versions available for push-pull tube 27mm (B27) and 32mm (B32).